Catalytic Water Conditioner Whole House 3-25 L/min

Catalytic water conditioners do effectively prevent the build-up of calcium that causes limescale in your pipelines, heating systems, and large and small appliances.

Yes, you can drink conditioned water because nothing has been added or taken away from the water.

Learn more about Salamander Pumps water conditioners by the link.

It is crucial to choose the right water conditioner to get results. Selecting the wrong size conditioner including using a larger diameter than needed can compromise water delivery and affect treatment quality.

Water conditioners size is selected based on the amount of water flowing through them. Check the flow rate of the incoming water and match this to the relevant water conditioner:

• 1-15L/min – Single Point Water Conditioner
• 3-25 L/min – Catalytic Water Conditioner Whole House 300x28mm 1/2″ BSP-T
• 24-54 L/min – Catalytic Water Conditioner Whole House 330x35mm 3/4″ BSP-T
• 45-90 L/min – Catalytic Water Conditioner Whole House 360x42mm 1″ BSP-T

In general applications where the flow rate is known to be low or there is relatively heavy scale build-up inside the pipe already, a conditioner one size smaller than the pipe diameter is recommended. Therefore, it is important for the installer to check the flow rate entering the property.

Which water conditioner do I need?

Salamander Pumps’ water conditioners have a warranty of 10 years.

Both the ½” & ¾” water conditioners have flow direction arrows engraved on the outside diameter.

The ½” single point water conditioner can be fitted in any orientation as it has a parallel alloy core.

All Salamander Pumps’ water conditioners can be installed both vertically and/or horizontally.

If the water conditioner is being fitted on an open vented (Gravity) system, it can be fitted further downstream to the cold-water tank where the water is held usually in a loft space. This will ensure that the water supplying the hot water cylinder has conditioned water.

If being used on an in-coming mains fed system, it should be fitted before any appliances like combi boilers or unvented cylinders and ideally before any Salamander Pumps’ product like an AccuBoost or TankBoost. In some cases, it might have to be fitted after the kitchen cold water drinking tap.

For the ½” & ¾” whole house water conditioners we recommend that they are fitted after the stop tap entering the property, this will ensure that the whole property will have conditioned water.

The ½” single point water conditioner can be fitted either to the mixer valve outlet or directly before the shower head.

Water that passes through a Salamander Pumps’ water conditioner will remain conditioned for up to 3 month if it is stored in a tank.