The pumps in the Right Pumps range utilise centrifugal force to increase water pressure to the whole house, delivering the most powerful and quiet performance of our range. Suitable for use with multiple outlets, including shower, bath, basin, toilet cistern and dish washer.
2 x 2.4 Bar Single Ended, Universal (Negative Head) Centrifugal Pumps
Compatability
2 x 3.6 Bar Single Ended, Universal (Negative Head) Centrifugal Pumps
Compatability
A universal (negative head) pump is suitable for systems where there is low or no natural flow.
These pumps pressurise the pipework between the pump and the outlet. When an outlet, like a tap or shower, is turned on, the pressure drops which a sensor in the pump recognises and activates the pump.
A positive head pump requires a minimum natural flow to activate, it will then assist and improve a natural flow of water.
Positive head pumps use a flow sensor to monitor the natural flow of water (without the pump) passing through the system. When the flow sensor detects a flow rate on both hot and cold of at least 2 litre per minute the pump will turn on.
Learn how to measure your water flow.
Right Pump SuperBooster pack can be used to ‘split’ a pumped gravity fed system, with one pump used to boost the cold water pressure and the other to boost the hot water pressure.
Customer Support
A gravity fed system is either positive head or negative head, depending on the natural flow rate of the water in the home.
Watch our video to learn how to measure the water flow rate and discover when a positive head will work for the system. If you are unable to achieve the minimum flow rate of 2 litres per minute from all hot or cold water outlets that are to be pumped, you will need to install a universal (negative head) pump.